Print Settings Generator

One complete starting profile — temps, fan, layer height, infill, and speed together — instead of hunting across five different charts.

The plastic you're printing with — this drives the recommended temperatures and speeds.
Quality uses finer layers and slower speed; Speed favors faster prints with coarser layers; Balanced sits in between.
The diameter of your printer's nozzle opening — 0.4mm is standard on most printers.
An enclosure is a box or chamber that fully encloses the print area to hold in heat and cut down on warping.

Why this pulls from several charts into one profile

Nozzle temp, bed temp, cooling, layer height, infill, and speed all interact — a fan setting that's right for PLA is wrong for ABS, and a layer height that works at one speed needs a different flow rate at another. This generator applies the same reference data as the individual charts on this site, but resolves it into one coherent starting profile instead of leaving you to reconcile five separate numbers yourself.

This is a starting point for a new profile, not your final settings

Every printer, every brand of filament, and every specific spool has some variation from these reference numbers — use this as the profile you start tuning from on a new material or new printer, then adjust based on how your own first few prints actually come out.

Enclosures matter more than people expect

ABS, ASA, PC, and to a lesser extent nylon all benefit significantly from an enclosure, which keeps ambient temperature steady around the print and prevents the warping and layer separation that rapid cooling causes in these materials. Printing them in an open frame printer in a cold room is possible but meaningfully riskier than the same print in an enclosure.

Related Calculators

Nozzle Temperature Chart

Bed Temperature Chart

Cooling Fan Recommendation Tool

Layer Height Guide

Find It on Amazon

Search Amazon directly for filament, printer parts, and accessories.